e 6989 India: Machinery: One of our customer needs High Speed Precision Diamond Saw continuously variable speed from 200 to 5000 rpm. Our contact no. is +91 (80) 34.....May 1, Contact Rs 1000 (open)

Specifications: 

a)  High Speed Precision Diamond Saw

Continuously Variable Speed From 200 – 5000 rpm, 2 inch Cutting Capacity, 100 – 1000g load application, RIM cabinet with transparent hood and safety interlock, Digital Touch-Pad control panel for setting of Speed, Load and Micrometer with LED Displays, Automatic Serial Sectioning for multiple cuts to desired thickness, Automatic Sample positioning to Micrometer levels via Control Panel, Program Storage Capacity for around 10 – 60 programs 

Automatic Dressing Chuck Operation, Cycle start / stop and Power on / off, Soft Start and Soft Stop Facility, Bar Graph load Monitor, Automatic Shut off / arm Retraction at completion of cut, Removable 2.8 liter re-circulating coolant System with submersible pump and transparent hoses. 

b)  Accessories 

I.  Flanges:

  1. Stainless steel precision Flanges, 1 ¾ inch (44 mm) dia, for max depth of cut with larger specimen and to use with smaller diameter blades.  Set of 2:1 Number.
  2. Stainless steel Precision Flanges, 2 inch (50.6 mm) dia, for max depth of cut with larger specimen and to use with smaller diameter blades. Set of 2:1 Number.
  3. Stainless steel Precision Flanges, 2.5 inch (64 mm) dia, for max depth of cut with larger specimen and to use with smaller diameter blades. Set of 2:1 Number.
  4. Stainless steel Precision Flanges, 3 inch (76 mm) dia, for max depth of cut with larger diameter blades, Set of 2:1 Number.
  5. Stainless steel Precision Flanges, 4 inch (102 mm) dia, for additional blade support at higher speeds, Set of 2:1 Number.
  6. Stainless steel Precision Flanges, 5 inch (125 mm) dia for additional blade support at higher speeds. Set of 2:1 Number.

II   Chucks:

  1. Single Saddle Chuck, for bar and tube stock up to 1 ¼ inch (32 mm) diameter, 1 Number.
  2. Double Saddle Chuck, 1 3/8 inch (35 mm) diameter capacity, prevents damage to specimen by holding sectioned portion firmly after cutting is completed, 1 Number.
  3. Specimen Chuck for 25 mm, 30 mm, 1 inch, 1 ¼ inch mounted samples, 1 Number.
  4. Specimen Chuck for irregularly shaped samples, 1 Number.
  5. Fastener Chuck, for longitudinal sectioning of tubes and solid cylinders from 1 1/8 inch to 2 1/8 inch (29 mm – 54 mm) in length, 1 Number.
  6. Wafer Chuck, for single crystals, thin sections and wafers, 1 Number.
  7. Dovetail Chuck, Quick release, for rigid mounting of samples up to 1 ¼ inch dia, 1 Number.
  8. Dovetail chuck, Quick release, for rigid mounting of samples up to 1 ½ inch dia, 1 Number.
  9. Rotating chuck to facilitate cutting of thicker samples of up to 2 inch dia, 1 Number.

c)  Additional Accessories:

  1. Precision 2 micrometer sample positioning system.
  2. General Usage Vise which holds up to 1 ¾ inch H * 2 inch D sample.
  3. Rotating Vise.
  4. T-Slot Bed Kit – Y-axis bed (with fasteners).
  5. T-Slot Bed Kit – X-axis bed (with fasteners).

d)  Consumables 

1.  Wafering Blades

Ø      High concentration Diamond Wafering blade, for cutting of Ferrous and Non-Ferrous alloys.

1.      3 inch dia 0.006 inch (75mm x 0.2mm) thickness: 1 Number.

2.      5 inch dia 0.015 inch (125mm x 0.4mm) thickness: 2 Numbers.

3.      6 inch dia 0.020 inch (150mm x 0.5mm) thickness: 1 Number.

4.      7 inch dia 0.025 inch (180mm x 0.6mm) thickness: 1 Number.

5.      8 inch dia 0.035 inch (205mm x 0.9mm) thickness: 1 Number. 

Ø      Low concentration Diamond wafering blade, for cutting of ceramics and Hard / Brittle  Materials like Alumina, SiC, Ziroconia, Silicon Nitride etc.,        

1.      3 inch dia, 0.006 inch (75mm x 0.2mm) thickness: 1 Number. 

Ø      Isocut Wafering Blades fro iron, Carbon Steels, High alloys Steels, Cobalt alloys, Nickel super alloys and Lead alloys.

1.      3 inch dia, 0.006 inch (75mm x 0.2mm) thickness: 1 Number.

2.      5 inch dia, 0.015 inch (125mm x 0.4mm) thickness: 1 Number.

3.      6 inch dia, 0.020 inch (150mm x 0.5mm) thickness: 1 Number.

4.      7 inch dia, 0.025 inch (180mm x 0.6mm) thickness: 1 Number.

5.      8 inch dia, 0.035 inch (205mm x 0.9mm) thickness: 1 Number 

2.   Cutting Fluid: 

Combination lubricant / Coolant concentration for use with High Speed Precision diamond Saw: 12 Numbers.

3.   Dressing Stick:

1 ½ inch x ½ inch 3 inch (13mm x 13mm x 76mm) dressing stick for scout and diamond wafering blades – 12 Numbers.