e 3469 Panama: Diamond
tools: Need 140
units of diamond wire 25mts length with the specification below. Pls let
us know delivery time, sales conditions, and payment instructions.
Completely
specifications of Diamond Wire:
a) Carrier Wire: Carrier wire shall be
made of 7x19 filaments ( total of 133 filaments) high tensile galvanized steel,
meeting ISO 2232 and ISO 2408 specifications, with an exterior diameter of 4.9mm
(+0.05, -0.15). Length of the wire assembly shall be manufactured to standard
length of 25 meters.
b) Connectors: The wire assembly must be easy to
repair on the job site by the use of hand-portable repair tool kit. The wire
will be supply with the steel connectors required for its operation. 15 units
will be required per 25 meters length.
c) Abrasive: Wire shall have
diamonds-impregnated beads. The diameter of the beads shall be 11mm as a minimum
and 12mm as a maximum and the number of beads shall be 40 per meter (spacing
center -to-center between beads =0.025 mts). Abrasive shall be industrial
diamond with a quality GE MBS 70, DEBEERS SDA 85, or greater. Diamond quantity
shall be 50 to 60 "con"; based upon 75 carat/cubic inch equals 125 "con".
Diamond grit size shall be between 60 to 40 mesh (US standard Sieve
Number).
d) Spacer: Wire shall have springs between the beads and
springs shall be covered with injected plastic spacers. Wire sections assembled
by threaded or straight copper or steel sleeves.
e) Recommended Use and
Production Expectancy: Impregnated diamond wire shall be recommended for use
on medium or heavily reinforced concrete (according ACI-318 standards), old
concrete with hard aggregates, and occasionally for abrasive materials. Under
these conditions, wire performance life shall not be less than 5.0 square meters
per linear meter of wire.
f) Equipment Compatibility: Impregnated
diamond wire shall be compatible with DIAMANT BOART-TARGET, Hydraulic Power Pack
DA-26 and Prof. Cable Saw SLA-800. The diamond wire must be capable of
sustaining a variable cutting speed range of at least 6.0 to 8.0 square meters
per hour.
g) The diamond wire must require no more than 32 to 44 liter/min.
of cooling fluid flow rate to comply with the required life and cutting speed.
Impregnated diamond wire must require no more than 35 to 40 HP during operation.
July 16
Offer 3: We are India`s leading and reputed diamond wire saw accessories
manufacturing and exporting co. like; Springs, Spacers, steel lock, copper
joints and 4.9mm wire rope.
We have wide dealers network in India.
We are exporting our products to agents abroad.
We have pleasure to inform
you that we are supplying our products to world's largest marble producers
companies since a long time. We can also supply you our best quality
products at all times.
offer 2: We can supply but need complete info
i.e.
- quantity and sizes
- delivery location and phone no.
- prefer to
buy locally or import? any preferred countries?
- stone details - country,
trade name or description, image, is it in FindStone's Stone Album?
- status
of project, expected purchase date, & decision criteria for purchase e.g.
price?
- application - where would it be used? or your company profile if you
are buying to stock it
If you have prices, tell us what they
are.
offer 1: Select from www.findstone.com/tosell.htm
and www.findstone.com/pricelists.htm
and www.findstone.com/readystock.htm
and www.findstone.com/matph.htm
Dear buyer, please put your response (to each of the above offers)
below the respective offer in blue ink and email it to us.
FindStone